Rigid

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug

Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.

- Tange Infinity CrMo steel unicrown fork for 26 MTB wheels - Suspension corrected for 80mm travel 26 frames 40mm rake - All have 51mm International Standard disc mount

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab. - Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers - 1 1/8" threadless steerer - 350mm long steerer - 44mm rake - 400mm axle to crown - 60mm inside width - Lugged Cross fork to match Double Cross Cyclocross frames - Lugged crown with Tange CrMo construction - Features eyelets for front rack and braze-ons for low-rider panniers

When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c

The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug

The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires. - 9mm x 100mm spacing - For use with short reach caliper rim brakes - 700 x 28c max recommended tire size - ASTM Condition 1 - For use on paved surfaces - Includes Whisky Parts Co. compression plug - Axle to Crown Length: 367 mm - Brake Mount (Fork): Short Reach Caliper (39mm - 49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 9mm x 100mm - Material: Carbon - Offset: 43 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 370 g - Wheel Size: 700c , 650b - Maximum Tire Clearance (Fork): 30c

Upgrade your road rig with Origin-8's Pro Pulsion Synergy Fork. It features an aluminum steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.

- Tange Infinity CrMo steel uni-crown fork for 26 MTB wheels - Suspension corrected for 80mm travel 40mm rake - Cantilever brake studs with dropout eyelet - Fork tip double eyelets (updated 2022) - 440mm axle to crown length (ideal for frames designed for 26" wheel 80-85mm travel forks; will also work well with frames designed for 100mm travel fork and have head angles 70 and slacker) - 1-1/8 CrMo steerer (250mm) - 40mm rake

- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch

Darkwave fork comes with the 28mm offset our team loves and backed by an unmatched and legendary 41-Thermal lifetime warranty against bending and breaking. - Legendary lifetime replacement warranty – laboratory tested and team proven - Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - Slightly longer steerer tube length for use with taller head tubes and Gyro installations - Rust-proofed with with a lightweight coating that provides the best anti-corrosion processing that's offered today - Optimized, 4mm thick dropout shape for grind and peg clearance - 7075-T6 pre-load bolt with 6 and 8mm hex key slots - 41 Thermal Processed: Sunday is the only company to use Odyssey's proven and trusted 41 Thermal heat treating. This formula has been refined and improved since the late 90's. The proven 41 Thermal process allows our products to be lightweight AND strong. It is also backed by a legendary lifetime warranty.

Road-race. Specific. Performance. Futura Caliper is the most updated creation of the Columbus Carbon Lab department for lovers of the traditional caliper brake. The all-new Futura range completes its offer with an exclusive fork, designed for the rider, starting from bike geometry and biomechanics requirements and needs. In fact, the Futura Caliper is the only oversized 1-1/2” tapered fork with multiple-rake: 45 and 50mm options that allow the cyclist, and even before him, the framebuilder, to properly complete their bicycles with the proper geometry and solutions, according to body requirements, sizes and riding style. Realized using ultra-light aerospace carbon fiber, Futura Caliper offers an extremely sharp riding experience thanks to its oversized sections and shapes, designed for an overall weight reduction of the structure, enhancing its stiffness and precision while cornering. The streamlined tapered front section, together with the curvilinear geometry of the blades, minimize aerodynamic resistance, granting a good vibration-dumping attitude, where, the overall aesthetic result, enhance Futura Caliper capability to perfectly match and complete the most updated carbon fiber frames as well as the new-generation hi-performance steel, alu and titanium designs. - T700S monocoque carbon fiber - 300mm tapered carbon steerer - Clearance for up to 28c tires - 9x100mm carbon fiber dropouts - 350g

The MCX TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.0" tires and 27.5" x 2.1" tires. Extra long 350mm steerers fit most 62+cm frames NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (The MCX also comes in a configuration for standard QR hubs. There is an MCX Max model that is burlier with a tapered steerer, thru-axle, and even more tire clearance) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Brake mount: Flat mount disc – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8" x 350mm – Weight: 870g (Including thru-axle and uncut steerer) – Matte Black and limited edition Moss Green to match the Soma Wolverine B-Type frame

- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake - Mini Rack Mounts

- Premium Cyclocross fork with CrMo blades - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Designed for disc brakes, 160mm rotors (International mount) - Straight blade design with D-shaped cross-section blades - Tange Infinity CrMo steel - 350mm 1-1/8" steerer - 400mm axle to crown - Two sets of fork-tip eyelets - Low rider pannier rack eyelets - 60mm inside width

- Designed to match the Pake Rum Runner Track frames - Straight legs with unicrown CrMo construction - 300mm CrMo steerer with 38mm rake

Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. FEATURES - Overall Reduced Size for Smaller Racers - 1 Inch 7000 Series Aluminum Steerer Tube - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bolded Dropouts COMPATIBILITY - Box One Stem Spacers - Box Two Stem Spacers - Box Two Threadless Headset - Box Two 1" Integrated Headset - Box Two 1" Integrated Conversion Headset - Box Two Headset Adapters - Box Two Top Load 1" Stem - Box Hex Lab 1" Stem - Box Two Center Clamp 1" Stem SPECIFICATIONS - 20 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1 Inch - Weight 397g/14.0oz

The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm

Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out. - Salsa Classico CroMoly - Forward-facing, stainless steel dropouts - 1-1/8? threadless steerer (260mm) - 468mm axle-to-crown - 45mm rake - ISO disc tabs - Tire clearance = 90mm - Fender eyelets -1080g with full-length steerer tube

Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g

Upgrade your road rig with Origin-8's Synergy Fork. It features an 4130 chromoly-steel steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.

Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)

This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires