$25.00 $50.00 50% Savings
Sugoi's Resistor Booties provide wind and water protection for those wet, cool rides. Made from stretch Lycra with a water resistant coating, they are light and snug enough to give you an aerodynamic edge. They also feature an offset rear zipper for easy on/off and reflective accents for enhanced visibility. • PU coated stretch Lycra offers lightweight wind and waterproof protection • Offset rear zip to eliminate Achilles tendon pressure point
Wind blocking protection and insulation fit over any cleat. • Fits all cleat sizes • Wind blocking construction • Shoe conforming snug fit • Fabric: Wind-Tech • Color: Black • Size: One size fits all
Sugoi's Resistor Toe Covers keep your toes warm so you can enjoy your ride. These lightly insulated, wind-resistant covers ensure warmth and comfort in cool weather rides. The stretch bound edges fit snugly around your shoes yet easily accommodate large cleats.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
- ProTextura™ outer fabric - ThermTextura™ inner fabric - Back zipper - Reflective accents
- ProTextura PLUS Wind and water proof material with critical seams taped - ThermTextura functionality due to the properties of neoprene - Medial locking side zipper with Velcro closure - Wear-proof bottom piece - Reflective details for additional visibility
- Three EVA interchangeable levels of support for arch and metatarsal offer complete customization - EVA base material with TPU vibration dampening material in the forefoot area for proper support and cushioning - Co-molded heel support zone is optimized to help stabilize the foot during pedaling - Articulating arch support area is designed for compatibility with ExoWrap technology - TransTextura Plus layer transfers moisture and helps fight bacteria and odors
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
These shoe covers are equipped with a patent-pending top zip opening that provides added aeration and allows riders to adjust shoes bearing a dial closure while riding. FABRICS: -NEOPRENE EXTREME 3 MM: Warmth, blocks cold and water DETAILS: -Patent-pending Thermo Air technology: Sealed zip opening at side allows easy access to attach system and provides aeration -Silicone elastic at the cuff: Better fit and prevents infiltrations Back opening with seam-sealed zip: Easy pull-on and water resistant -Sealed tape on seams: Water resistant -Water resistant -Flatlock seams: Enhanced comfort -Reinforced kevlar under sole: Better durability -Reflective puller
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
When riding in cold and wet weather, our body’s extremities are usually the first to suffer from the cold. Garneau's Neo Protect II Shoe Covers are designed to keep your feet warm and protected so you can continue riding no matter what the weather has in store. Boasting 3mm of windproof neoprene, they create a barrier between you and the wind and cold. You'll love the Velcro backs that make for easy on/off and the reflective logos for enhanced visibility!
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
Fully taped seam sealed water protection, constructed with Zap fabric for ultra-visibility, a modern staple for commuting and low-light training rides. • A versatile bootie with a relaxed fit • Hook-and-loop rear closure offers a wide range of fit depending on shoe profile FABRIC: ZAP WOVEN, HYDROSHIELD-VENDOR SOURCE FABRIC BLEND: 60% POLYESTER, 25% MICRO-GLASS BEADS, 15% POLYURETHANE FABRIC METRICS: 3.54 OZ/YD2 120 GSM
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
- ProTextura PLUS Wind and water proof PU coating with critical front seam taped - ThermTextura Thermal brushed fleece inside - Back locking zipper with Velcro closure - Tough: Wear proof bottom piece - Reflective prints on the toe and along the zipper welt for additional visibility
Make sure your gear is working for you during your next aero event. Giant's Aero Shoe Covers help smooth airflow over your feet and reduce drag. Stretchy Lycra covers with sublimated graphics and a back zipper closure make it easy to get these covers over your shoes.
$32.50 $65.00 50% Savings
Keep your feet warm and toasty on even the coldest winter days with Sugoi's Firewall Booties. Sugoi's Firewall fabric is windproof and offers exceptional insulation. These booties also feature a unique horizontal zipper on the side for easy on/off as well as easy shoe adjustments mid-ride.
$33.00 $55.00 40% Savings
Sugoi's Zap Shoe Covers keep your feet dry and visible on your weekday commutes. These water-resistant, highly-reflective booties enhance your visibility in low-light conditions, while an offset rear zip ensures a comfortable fit.
$20.00 $40.00 50% Savings
Sugoi's Resistor Aero Shoe Covers provide lightweight, aerodynamic wind protection. Made from stretch Lycra with a water-resistant coating, they're also great for cool, damp rides. The offset rear zipper makes for an easy on/off and a comfortable fit. • PU coated stretch Lycra offers lightweight wind and waterproof protection • Offset rear zip to eliminate Achilles tendon pressure point
When the temperature starts to drop, reach for Giant's Winter Fleece Shoe Covers. Polyurethane-coasted ProTextura fabric is wind and water proof, and fleecy ThermTextura fabric liners help seal in the warmth. A rear zipper makes these covers easy to get on and off.
LOOK KEO compatible road cleats - Unique 2 piece design allows you to change cleats without losing position - Durable, high traction walking surface - Hardware included
Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
Added insulation and wind protection. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Reflective accents and logos
Page 1 of 2 Next page