Hubs

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Sealed stainless Steel cartridge bearings throughout - Hub shell machined from a single forged aluminium billet - 6 bolt disc or Centrelock fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in QR, 9mm, 12mm, 15mm and 20mm - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple - Available in 24, 28, 32 and 36 hole drillings - Conversions available for QR, 9mm, 12mm, 15mm, 20mm, Torq and Boost - Machined from forged 2014 T6 Aluminium billet

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

This is the rear hub we want on our bikes. A lightweight, durable, ratchet drive hub with high quality bearings and seals to give you the best combination of performance, durability and price. This is the new benchmark for a no-nonsense rear hub.

Freehub for OneUp Rear Hubs. Available in XD/XDr, Hyperglide (HG) and Microspline (MS). Includes drives side end cap. Our XD / XDr Freehub can function as an XD freehub with the 1.85mm spacer installed or as an XDr freehub by removing the spacer.

SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.

Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.

- Ultra-lightweight road or gravel hubset
- Equipped with ABEC5 Enduro bearings
- Rear hub features a three-pawl engagement system
- J-Bend flanges
- Made in Buggingen Germany
- HG 11sp driver body version is compatible with HG 11/12sp Spline L cassettes
- 200lbs max rider weight

- Ultra-lightweight mountain hubset
- Equipped with ABEC5 Enduro bearings
- Rear hub features a three-pawl engagement system
- J-Bend flanges
- Made in Buggingen Germany
- 200lbs max rider weight

Key Features - 10, 11 and 12-speed compatible - Sealed stainless Steel cartridge bearings - Hub shell machined from a single forged aluminum billet - Standard 6 bolt disc fitting - 4 Pawl ratchet system with 44 tooth engagement (8.2 deg) - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in 170/177 and 190/197mm widths (specific hub shells)

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs

12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.

- Axle/Spacing: 10/14 x 135mm bolt-on - 14mm adapters included - Micro-drive cassette rear hub for singlespeed and dirt jump - International Standard 6-bolt disc rotor mount - Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro-drive, thus prone to higher loads) - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame) - 12mm thru-axle conversion for DJD-BD available separately - No cog included - 9/10/11/13/16t mini sprockets available separately

- Axle/spacing: 10 x 120mm nutted - Hole: 32-hole - Weight: 304g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish - 120mm OL spacing rear hub with either double fixed flip-flop threading or fixed on one side and freewheel thread on the opposite - 130mm OL rear axle conversion sold separately

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - 108 points of engagement with a new offset 4 pawl freehub design - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Fully serviceable and rebuildable with simple tools

Key Features - Sealed stainless Steel cartridge bearings - Hub shell machined from a single forged aluminum billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in 135, 142, and 150mm width FDS - Weight: 255g

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

Centerlock Disc Fitment. 135 QR. Shimano HG Alloy, Shimano HG Steel, Shimano MicroSpline, XD, XDR freehub options"

Track Rear Hub - .

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Dependable Independence – Reliability, versatility, and simplicity are united in a hub.



The 350 hub is a dependable road mate for every adventure, whether on asphalt or gravel roads. A lightweight axle in combination with a milled hub body ensures a low weight while the proven Ratchet System with 36 teeth guarantees reliable power transmission. The plug-in construction allows maintenance of the freehub system without special tools and conversion to different standards - for maximum versatility.



PRODUCT DETAILS:



- A DEPENDABLE HUB

The freehub Ratchet System makes the 350 the dependable partner for any ride



- NO TOOL CONCEPT

Plug-in hub construction allows for quick and tool-free maintenance



- NEW ENDCAPS

The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly



- VARIETY

The 350 hub is available for all common axle standards and for the various drivetrain systems.



TECHNOLOGY:



We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.



LEGENDARY RELIABILITY:



The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.

The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

The number to count on—240 with Ratchet EXP.



The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

The Box Three Expert Front Hub is a lightweight version of the Pro-sized counterpart. It includes precision sealed bearings but uses aluminum axles, a smaller hub-shell, and lightweight hardware; for the smaller riders who like to go fast! Hub features a quick-release style front axle. FEATURES - Lightweight Construction. - Bearings Built To Avoid Contamination. - Quick Release Style Through Axle To Secure Against Movement. COMPATIBILITY - Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork - Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork - Box One 24x1-1/8" 28-Hole Front Rim Black - Box One 20X 1-1/8" 28-Hole Rim Rear Black

- Use a front/reat set or match the front with Sturmey 3sp fixed rear or 2sp kickback rear - 6061 aluminum shell with sealed cartridge bearing and solid nutted axle (145mm front/175mm rear overall axle length) - Rear is flip-flop threaded for freewheel

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.



The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.