Accessories

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension MTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

- Protects high risk areas from rock chips, wear & scratches - Designed around road and gravel bike geometry - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

150 lumen headlight + amber side lights Great optics, abundant lumen output and amber side lights make Planet Bike's Blaze 150 SL a smart choice for the urban bike commuter. It features excellent run times from easily replaceable AA batteries and its 3 modes keep you seen both day and night. FL1 TESTED RUN-TIMES - 4.8 hrs (high – 150 lm), 11 hrs (low - 70 lm) and up to 62 hrs (Superflash - 150 lm) LIGHT PATTERNS - Cree XP-E2 LED provides high and low power beam along with Superflash patterns REPLACEABLE BATTERY - 2 AA batteries (included) SAFETY SIDE LIGHTING - Amber side lights provide 275° of visibility FL1 RATED WATER RESISTANCE - Water resistance rated to IPX6 standard SPECS - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 5 hrs (high – 150 lm), 12 hrs (low - 70 lm) and up to 64 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams

Maximize your visibility with this amazing taillight. Planet Bike's Superflash aims a one-watt Power LED plus two red LEDs for light that can be seen for up to one mile! The ultra-compact case is weatherproof, light and durable. And, the Superflash Turbo includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

- 180 gram, 15-function folding multi-tool with 2.5, 3, 4, 5, 6, 8mm hex wrenches, T25 &T30 Torx wrenches, #2 Phillips and flat blade screwdrivers, two tire levers, 3.23 & 3.45mm spoke wrenches, and bottle opener. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. - Ergonomic body made of light but tough composite material. The new ICM-15 brings a slimmer, lower weight, lower price-point model to the ICM family while still packing 15 essential tools ready for trailside adjustments and repairs to keep you riding. The ICM-15 features tools made from heat-treated tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, a body made of lightweight but super tough composite material, and two full-function tire levers.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.

Hydration is power. Osmo Active Hydration is a during-exercise hydration drink that was developed to be the fastest way to rehydrate. Based on peer-reviewed science, the formula contains an optimized ratio of natural and functional ingredients like sucrose, glucose, and electrolytes and is flavored with real fruit to: - Increase power output - Improve endurance - Avoid cramping To maximize and sustain power, stay hydrated. As body-water drops, so does aerobic power; by the time you’re thirsty you’re already about 2% below optimal body water, which can result in an 11% reduction in power output. Individual body-water loss varies among athletes and according to exercise intensity and weather conditions. Most people, under most conditions, should drink 20-25 ounces of Osmo Active Hydration per hour of exercise (roughly one small or large water bottle). Lighter athletes or athletes exercising in cool weather conditions may only require 16-18 ounces an hour. Larger athletes or athletes exercising under hot and humid conditions may require up to 30 ounces an hour. As endurance athletes, our bodies produce power through aerobic metabolism. Aerobic metabolism requires oxygen-rich blood to flow to the muscles. As body-water drops (due to perspiration and respiration), blood “thickens”, which reduces heart-stroke volume. This means that if you don’t start your effort hydrated, you won’t be performing at your best. If you don’t replace body water rapidly during your workout, your heart rate can hold steady (or even rise), but power will drop (known as “Cardiac Drift”). In many cases, an athlete’s rate of fluid loss is greater than their body’s ability to replace it orally. What this all means is 1) you should start your workout fully hydrated, 2) you can’t wait until you’re thirsty before you start drinking, and 3) you should be drinking Osmo Active Hydration, because it’s been developed to be the fastest way to replace body-water orally. How is Osmo so fast at replacing body-water? To answer this question, we want to tell you about an American Chemist named Dr. Robert K. Crane. In 1960, Crane presented his discovery of the sodium-glucose cotransport system. Later, The Lancet called Crane’s discovery “…the most important medical advance this century.” In plain language, when glucose and sodium are present in the small intestine, water is drawn into the bloodstream at a much faster rate. Crane’s discovery of cotransport led directly to the development of oral rehydration therapy. Oral rehydration therapy has saved the lives of millions of people suffering from dehydration in underdeveloped countries since the 1980s. Crane’s scientific cotransport discovery paved the way for Osmo Active Hydration. We have studied, tested and perfected the science of oral rehydration, honing the ratio of sodium (and other electrolytes), glucose and the other natural and organic ingredients to maximize the rate of fluid absorption and palatability.

PREPARE TO PERFORM. PreLoad Hydration is ONLY for use before intense efforts, ultra-endurance events or exercise in hot conditions. Not for use during exercise. Osmo PreLoad Hydration is a hyper-hydrator developed based on peer-reviewed science to: - Increase performance during hot and intense efforts - Maximize sustained power - Reduce muscle fatigue Using Osmo Preload Hydration sets the body up for success during high intensity exercise. By boosting your sodium stores and plasma volume before you exercise, you maximize thermoregulation and your performance. Osmo Preload Hydration is a special application product developed for use before hot events, time trials, and high intensity efforts. Preload increases total body water and plasma volume, provides a buffer for lactic acid, and increases the cofactors needed for aerobic metabolism. This allows athletes to optimize their performance in hot conditions and during high intensity activity. For best results, we recommend drinking Preload the night before and the morning of an intense effort. We all know that during exercise, your working muscles produce heat, and your body temperature rises. When your body temperature gets above 103 degrees Fahrenheit, your body systems become compromised – resulting in a precipitous drop in power and performance. What you may not know is that when an athlete begins to feel thirsty, he is already at around a 2% body water loss, which can result in an 11% decrease in top-end power. Your body works to regulate increasing core temperature by moving blood to the skin and offloading heat through sweating. For cooling to work, though, you need to maintain a balance of fluid in your body, so you can sweat properly and maintain your plasma volume. In hot environments and/or during high-intensity efforts, water loss through fast breathing and sweating can be SO rapid that it becomes impossible to replace fluids fast enough to maintain your optimal body water. This drop in body water and the related rise in your core temperature hurts performance. Fortunately Osmo Preload Hydration can prepare you for this through hyper-hydration, which means going into in an event with extra body water. This keeps dehydration and it’s related performance losses at bay. There are four primary things that Osmo Preload does to improve performance: First, Osmo Preload increases blood plasma volume, which in turn increases heart-stroke volume, as well as the total volume of blood circulating. This increased circulation allowing your blood to go both to the working muscles AND to the surface to dissipate heat. With greater blood volume, your muscles can function optimally and the heat can dissipate from your skin effectively. Second, since you start the event in a hyper-hydrated state, you have more total body water to support your body’s thermoregulatory system. Effectively slowing the rate of core temperature rise, which slows fatigue and maintains power output. Third, Osmo Preload stops cramping by increasing total body sodium stores, eliminating the need to take on additional sodium during long-duration events. Finally, Osmo Preload contains sodium citrate and sodium bicarbonate, which both act as buffering agents. The citrate works to keep aerobic metabolism revved, while the bicarbonate works to buffer lactic acid during intense efforts. And all of this is based on published science. Which is why we say that Osmo Preload Hydration sets the body up for success by boosting sodium stores and plasma volume before hot and high intensity exercise, which both maximize thermoregulation and your performance.

- CNC machined AL6061 alloy Garmin stem mount - Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000

Ever wish your cable was longer so that you could lock up multiple bikes? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.

With OnGuard's Doberman Combo lock, all you need is your bike, the lock, and a number you can remember. This combination lock uses four numbers and can be reset any time. It's made from a strong steel cable covered with tough vinyl to protect both itself and your bike. The Doberman Combo is also self-coiling for easy transport.

The NiteRider Sentinel 150 incorporates three powerful LEDs to produce a retina-searing, daylight-visible, 150 lumens that allow you to be seen day or night. The Sentinel has 5 modes, is USB rechargeable, and has a unique safety feature — Laser Lanes! The Laser Lanes mode is designed to project ultra-bright laser lines on the ground, giving the rider their own virtual lane, further increasing visibility. - The Sentinel 150 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - Class leading ultra bright 150 lumen output - All in one, Laser and tail light! - Compatible with round and aero seat posts - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, water resistant

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals