Protective/Armor

Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary

Protect your little rider with Strider's Knee And Elbow Pad Set. These tough pads boast premium hard plastic outer shells and Velcro straps to keep them securely in place.

Consider yourself one of the lucky ones if you’ve felt the thrill of soaring down the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Knee Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep you cool and dry, even on hot summer days. And, it's antimicrobial so it doesn't absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Consider yourself one of the lucky ones if you’ve felt the thrill of soaring down the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Knee Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep you cool and dry, even on hot summer days. And, it's antimicrobial so it doesn't absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

- Knee protection with flex zone to ensure pad stays in place and a 1mm cap for protection - Double layer polygon perforated foam to increase airflow and reduce weight - Center strap above the calf to prevent slippage and ensure a perfect fit - Designed beyond CE EN 1621/1 Standards

POC's Joint VPD 2.0 DH Long Knee pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your legs and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic knee cap adds an extra layer of protection and reduces friction with the ground when crashing. The extra length helps in the event of the dreaded slipped pedal strike.

POC's Joint VPD 2.0 DH Elbow pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your arms and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic elbow cap adds an extra layer of protection and reduces friction with the ground when crashing.

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

The Launch Pro D3O Elbow Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these elbow guards utilize D30 - the worldwide leader in impact reducing materials - and combine that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the elbow guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to provide a hard shell-like protection. The Launch Pro D3O Elbow Guards have a breathable, moisture wicking construction, so they remain comfortable all day long. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front cap to reduce snagging - D3O CE certified insert for impact protection

- Removable D30 High performance shock absorbing protective foam at shoulders and spine - Custom Heat-Moulded foam chest piece - Works in conjunction with leading neck braces - Strategic fabric mapping: Highly durable dense mesh throughout the core ensures second skin super fit to keep targeted protection in its place and allows for maximum venting - Lycra stretch panels are integrated with flatlock seam finish to ensure mobility and comfort through the athlete's full range of motion - Sizing is built for snug fit

That voice in your head that’s telling you to back off and slow it down—yeah, you don’t need to listen to him. . iXS’s Mallet Knee/Shin Guards have you covered, literally. They are lightweight, loaded with high-tech features, and they fit securely to give you extra confidence. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. • ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic • SqueezeBox: an articulating joint at the knee for a great fit with max comfort while pedaling • NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees • KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact

Freeride legend Darren “The Claw” Berrecloth demands the best when it comes to his equipment. iXS’s Dagger Knee Guards were developed with input from The Claw, so they have everything you need when you’re pushing the envelope. Specially designed for gravity applications, the Daggers are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit, and iXS’s LoopLock closures provide compression with maximum security. Key Technologies: - Armadillo Duo: Dual-compound hard shells provide skid and puncture protection while remaining flexible - SqueezeBox: Patented shell linkage allows for full articulation without sacrificing protection - Knee Gusset: Internal padding around the patella locks protector in position and distributes impact forces around the knee - AeroMesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. Note: This guard is not rated for impact. It is recommended for minimal coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - Silicone patch at shin eliminates slippage - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only

Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. Note: This guard is not rated for impact. It is recommended for minimal coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only

POC's Spine VPD 2.0 Back offers maximum protection in a minimalist package. It uses 3-ply Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. The pad is vented, making it highly breathable, and the adjustable shoulder straps and waistband make sure it comfortably in place.

Fox's Launch Elbow pads feature a ribbed hard shell forearm and elbow cup for superior impact and trail rash protection. The molded Biofoam chassis dissipates force in the event of a crash. Plus, with vented plates and forearm cross-strapping, the Launch pads breathe well and stay put.

Go big with confidence when you're rocking Fox's Titan Sport Jacket. It offers exceptional back, chest, shoulder and forearm protection for the serious gravity riders out there. The Titan features high-density foam and high-impact plastic for maximum safety and the removable spine protector boasts a built-in kidney belt, too. Plus, the entire jacket has perfectly placed mesh ventilation zones for comfort and breathability.

Fox's Launch Sport Elbow Pads give you elbow and forearm coverage that stays put. Their molded plastic shell dishes out serious protection and the soft bio-foam liner provides real comfort. And, a simple strap system with Velcro attachments keeps the pads secure.

• Lightweight, slip on, soft knee pad provides functional coverage. • Articulated, perforated neoprene chassis delivers an ergonomic and comfortable fit. • Knee-cup area padding with an abrasion resistant outer panel ensures proper coverage and durability. • Lightweight rear stretch panel allows for bind-free range of motion and moisture control.

• Lightweight, slip-on, soft elbow pad provides functional coverage. • Articulated, perforated neoprene chassis delivers an ergonomic and comfortable fit. • Elbow and forearm area padding with an abrasion resistant outer panel ensures proper coverage and durability.

POC's Joint VPD 2.0 Knee pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.

POC's Hip VPD 2.0 Shorts protect your tailbone and hips with Visco-Elastic Polymer Dough that is flexible when moving, then turns rigid upon impact. Wear these liners under your DH shorts and you get muscle support, a chamois and peace of mind. They fit well thanks to stretchy fabric and breathe well due to the ventilated mesh.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.

POC's Joint VPD 2.0 Elbow pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.

- Featuring D30 high performance shock absorbing foam - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Woven upper elastic strap for personalized fit and lower Neoprene comfort band - Branded rubber grab tabs

- Same knee construction as the Ambush pad with just enough of an extension to put an end to pedal bite - Open-back construction means no awkward shoe removal on the trail - Featuring D30 high performance shock absorbing foam - Additional EVA foam extension saves shins from pedal bite - Proven Race Face open-back construction; no shoe removal necessary - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Foam padded side walls offer additional coverage - Branded rubber grab tabs

Sometimes you want coverage, but you don't full full-on DH pads. POC's Joint VPD Air Elbow pads are perfect for rowdy trails where you're pedaling most of the way. The pads use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. They're breathable, stay where they're supposed to and are so light, you don't know they're there. Until you need them.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel.

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking